5-651 Wilton Grove Rd

London, ON, Canada N6N 1N7

Email

sales@islandsons.com

Troubleshooting Streaks, Peeling, and Bubbles in Bathtub Coatings

Posted On :

Share This :

Bathtub coatings

​Even experienced refinishers occasionally encounter defects that compromise an otherwise well-executed project. Problems such as streaks, peeling, bubbles, and fish eyes can affect the appearance and longevity of bathtub coatings, often leading to unnecessary rework and costly callbacks. In many cases, these issues are preventable when every stage of the refinishing process follows a compatible system.

Rather than treating each defect as an isolated problem, it is often more effective to identify the conditions that caused it. Surface preparation, adhesion, product compatibility, application technique, and environmental conditions all influence the final result. A systematic approach helps eliminate variables before they become visible in the finished coating.

Surface Preparation Sets the Foundation for Bathtub Coatings

Most coating failures begin before the glaze is mixed. Soap residue, silicone, body oils, waxes, mineral deposits, and cleaning product residue can interfere with adhesion, even when they are not immediately visible. Thorough cleaning removes contaminants that prevent the glaze from bonding uniformly with the existing surface.

Using a cleaner designed specifically for refinishing also helps create consistent preparation from one project to the next. Starting with a properly cleaned surface reduces the likelihood that contamination will affect the finished coating. Preparation should also account for the bathtub material. Porcelain, enamel, fiberglass, and acrylic each require different preparation methods before glazing begins.

Peeling Usually Starts With Poor Adhesion

Peeling rarely develops without warning. Although the coating may initially appear sound, weak adhesion often reveals itself after repeated exposure to water, cleaning products, and daily use.

Fiberglass and acrylic surfaces require particular attention because they behave differently than porcelain and enamel. Applying glaze directly to these materials without the proper adhesion promoter increases the likelihood of coating failure.

Simple bathroom with brown and natural earth hues

For these applications, Crosslink III provides the critical bond between the prepared surface and the glaze. This butyl adhesion promoter is specifically formulated for fiberglass and acrylic, eliminating the need for acid etching while promoting excellent adhesion before glazing begins.

When the substrate has been properly prepared, and the correct adhesion system is used, peeling becomes far less likely over the life of the refinished bathtub.

Fish Eyes and Bubbles Often Share the Same Cause

Fish eyes and bubbles are among the most frustrating defects because they interrupt an otherwise smooth finish. Fish eyes typically appear when silicone, wax, oil, or similar contaminants repel the glaze during application.

Even small amounts of contamination can create noticeable imperfections across the finished surface. Bubbles often result from trapped moisture, surface contamination, or improper preparation. Environmental conditions may also contribute when humidity levels interfere with curing.

The best solution is prevention. Careful cleaning, complete surface preparation, and maintaining a clean work environment greatly reduce the chance of either defect developing.

Streaks Are Usually an Application Issue

Unlike peeling or bubbles, streaks are usually related to application technique rather than adhesion. Spray distance, gun speed, overlap, air pressure, and material reduction all influence how the glaze flows across the bathtub. Small inconsistencies during application can become much more noticeable once the coating cures.

Maintaining consistent spray technique helps produce a smooth, uniform finish with even gloss from one end of the bathtub to the other. Using products that are designed to work together also improves spray consistency because reducers, activators, and glaze formulations have been engineered for compatibility.

Why Mixing Products Can Cause Bathtub Coatings to Fail

One of the easiest ways to introduce unnecessary variables into a refinishing project is by combining products from different coating systems. A cleaner from one manufacturer, an adhesion promoter from another, and a glaze from a third may each perform well individually.

However, they were not necessarily developed or tested to work together. Using a complete refinishing system reduces uncertainty because every product has been formulated for compatibility throughout the process.

Bathroom with white walls and floors and a bathtub with fresh coatings

Cleaning products, adhesion promoters, glaze, activators, reducers, and specialty additives all contribute to the overall performance of the finished coating. Following one complete system also makes troubleshooting easier because every stage follows the same manufacturer's recommended process.

Proper Curing Protects Finished Bathtub Coatings

The refinishing process does not end once the glaze has been sprayed. Proper curing allows the finish to develop its intended durability and appearance. Environmental conditions influence curing speed, gloss development, and overall coating performance.

Temperature and humidity should remain within the recommended application range whenever possible. Faster curing allows projects to move forward more efficiently while maintaining the quality of the finished surface. Allowing adequate cure time before returning the bathtub to service remains one of the final steps in achieving long-lasting performance.

Prevent Bathtub Coating Failures With the Right Reglazing System

Streaks, peeling, bubbles, and fish eyes rarely result from a single mistake. They usually develop when small issues accumulate throughout the refinishing process. Thorough cleaning, proper adhesion, compatible products, careful application, and controlled curing all contribute to a durable finish that continues performing long after installation.

At ISI Bathroom Systems, we proudly distribute the complete TopKote Reglazing system for professional bathtub refinishing. From TopKote Tub & Tile Cleaner for surface preparation to Crosslink III for fiberglass and acrylic adhesion, TopKote Low VOC Glaze for a durable, high-gloss finish, TopKote Fish Eye Eliminator for contamination-related defects, and TopKote Accelerator for faster dust-dry times, every product is designed to work together as part of one complete refinishing system.

​​​Connect with us or visit our online shop to learn more about our full range of products.

LinkedIn
LinkedIn
Share
Instagram